1. Gypsum powder quality standard: in compliance with GB/T 9776-2008
2. Main Technology(here take Nature gypsum rock as example)
Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (gypsum stucco/powder)-packing
DCI designs, manufactures and commissions complete gypsum powder production lines with an annual capacity of 20,000 to 300,000 tons per year. Each line is delivered as a turnkey gypsum plant: process design based on your raw material and fuel, equipment manufacturing at our own works, installation and commissioning on site, and operator training. Because capacity, raw material and heating method vary from project to project, every gypsum factory setup we quote is configured individually rather than taken from a fixed catalogue.
Item | Specification |
Annual capacity | 20,000 – 300,000 t/y (by configuration) |
Control | Fully automatic / semi-automatic, Siemens PLC |
Calcination system | Boiling kiln (FTL series) or rotary kiln (XGY series) |
Fuel | Natural gas, diesel, coal, heavy oil |
Raw material | Natural gypsum rock, FGD gypsum, phosphogypsum |
Product | Building gypsum powder (semi-hydrate gypsum, CaSO4·1/2H2O) |
Standard | GB/T 9776-2008 |
Delivery scope | Design, manufacture, installation, commissioning, training |
Two calcination routes are available. The boiling kiln suits compact sites and lower investment; the rotary kiln suits projects that need higher whiteness or a wider feed size range.
Boiling kiln — FTL series
Model | Capacity (t/y) | L*W (m) | Height (m) | Heat value (kcal) |
FTL-2 | 20,000 | 1.0*1.2 | 4.5 | 80 |
FTL-5 | 60,000 | 1.6*1.8 | 4.5 | 240 |
FTL-10 | 100,000 | 2.0*2.2 | 4.5 | 400 |
FTL-15 | 150,000 | 2.2*2.4 | 4.5 | 600 |
FTL-20 | 200,000 | 2.4*2.6 | 4.5 | 800 |
Rotary kiln — XGY series
Model | Capacity (t/y) | Specification | Power (kW) | Heat value (kcal) |
XGY-2.5 | 100,000 | 2.5×23 | 55 | 500 |
XGY-2.2 | 70,000–80,000 | 2.2×22 | 45 | 400 |
XGY-1.8 | 50,000 | 1.8×20 | 30 | 250 |
XGY-1.5 | 20,000 | 1.5×16 | 22 | 120 |
Gypsum powder production line price and gypsum powder plant cost are driven by several factors rather than by capacity alone: the raw material (natural gypsum rock, FGD gypsum or phosphogypsum behaves differently in crushing, grinding and calcination), target capacity, the calcination route, the fuel available on site, the level of automation, site and building conditions, and how much of the plant falls inside our supply scope. We issue a price range once your configuration is confirmed, so that the figure reflects your project rather than an average.
Gypsum rock is first crushed, then ground, then calcined, then aged and finally packed. A mechanised line is built from five systems: grinding, automatic measuring, calcination, heat supply, and aging and packing. Where the incoming rock is large, a crushing system is added ahead of grinding to reduce it to 0–30 mm before it enters the mill.
Boiling kiln (FTL series) — a fluidised-bed calciner, using thermal oil, hot air or steam as the heating medium. It is compact for its output, simple in structure, low in energy consumption, and produces a stable phase composition, which keeps the physical properties of the finished powder consistent. Investment and running costs are both comparatively low.
Rotary kiln (XGY series) — a rotary calciner upgraded from the conventional design, changed from direct firing to indirect combustion. It produces higher-whiteness powder, accepts feed up to 30 mm, and can also calcine powder finer than 80 mesh. It supports either calcining before grinding or grinding before calcining, and the setting time can be adjusted: initial setting 3–10 minutes, final setting 9–20 minutes.
The line processes natural gypsum rock, FGD (desulfurisation) gypsum and phosphogypsum. An FGD gypsum powder plant and a phosphogypsum powder plant differ in their feed preparation and drying stages, so the raw material is confirmed before the flow sheet is fixed. Fuel options are natural gas, diesel, coal and heavy oil, selected against the energy available at the project site.
Output meets GB/T 9776-2008. Setting time is adjustable: initial setting 3–10 minutes, final setting 9–20 minutes. The finished powder is used for gypsum board, gypsum block and plaster powder production.
DCI engineers attend site for mechanical installation, electrical commissioning and trial production, and remain until the line reaches its design capacity. Operator and maintenance training is carried out during commissioning. Gypsum plant installation and commissioning are included in the turnkey scope, together with one year of warranty, remote technical support and long-term spare parts supply.
Country | Capacity | Configuration |
Morocco | 300,000 t/y | Natural gypsum + rotary kiln |
Oman | 180,000 t/y | Natural gypsum + natural gas |
Russia | 150,000 t/y | Natural gypsum + boiling kiln + natural gas |
Ethiopia | 100,000 t/y | In production |
Kyrgyzstan | 60,000 t/y | Supplied with gypsum board line |
Q: What capacity can a gypsum powder production line achieve? A: From 20,000 to 300,000 tons per year, depending on configuration. The models listed above cover the individual kiln ranges; larger annual outputs are reached by combining units.
Q: Should I choose a boiling kiln or a rotary kiln? A: The boiling kiln is compact and lower in investment, which suits most standard projects. The rotary kiln produces higher-whiteness powder, accepts coarser feed and allows the setting time to be adjusted, which suits projects with specific product requirements.
Q: What raw materials can the line process? A: Natural gypsum rock, FGD (desulfurisation) gypsum and phosphogypsum. The feed preparation and drying stages are configured according to the material you will use.
Q: What fuel can the calcination system use? A: Natural gas, diesel, coal or heavy oil. The choice is usually decided by what is available and economical at the plant site.
Q: How much does a gypsum powder production line cost? A: Cost depends on capacity, raw material, calcination route, fuel, automation level and site conditions. We issue a price range once your configuration is confirmed.
Q: Does DCI provide installation and commissioning overseas? A: Yes. Our engineers attend site for mechanical installation, electrical commissioning and trial production, and stay until the line reaches design capacity. Operator training is included.
Send us your target capacity, raw material type and available fuel, and our engineering team will return a tailored configuration and quotation. Hengshui Decheng Machinery & Equipment Co., Ltd. (DCI)
Email: dci@chinagypsummachine.com | WhatsApp: +86 13930110827 / +86 18203235588
| www.dcimachine.com
Related Products:Gypsum Board Production Line,Gypsum Powder Production Line,Gypsum Block Production Line,steel structural workshop.
Processing Demand Survey
x