Gypsum powder production line (natural gypsum) uses advanced processing equipment such as a vertical mill, boiling furnace, etc. The boiling furnace is the most widely used gypsum calcining equipment in China, and is applied to calcining process of natural gypsum and chemical gypsum.

Product Details:1.Calcined gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer. After well mixed into slurry and spreaded onto the gypsum board protective paper which is continuously moving forward. When going through shaping machine, the slurry is fully wrapped by upper and lower paper, pressed into well-regulated gypsum board which is brought forward as per a stable and strictly controlled speed.

Advantage of Gypsum Board Making Line:The big advantage is the dryer system, which is the most important section in gypsum board production line and also a key link to ensure of finished boards’ quality. 

After cutting, the wet gypsum boards are detected and quick conveyed by speedup conveyor to 1# cross belt conveyor area, the waste boards are going out of the running line by its belt conveyor, and quality boards are lifting and turning over by inverter, then grouped into different groups and then sent to dryer entry end through tippler. This system is full automatically controlled by PLC. After dryer feeding, front side of board is upward to effectively prevent front side from damaging; to make full use of space and heat in the dryer more effectively.

Plasterboard production line works as often as necessary without consuming energy. Gypsum is the ideal surface for a wall because it has the same PH value and thermal conductivity properties as the human skin. Building materials made of gypsum always feel warm when touched. Gypsum board machine is no deception because gypsum possesses low thermal conductivity properties. As a result, gypsum building materials store has a warm feel.