The working principle of the whole production line is: firstly, the raw materials are accurately measured and mixed, and then the mixed raw materials are sprayed onto the paper panel through the spray system, and after being pressed and dried, the final gypsum board is formed. Finally, the finished plasterboard is cut and packaged to meet market demand.

The foaming agent is used in the production of gypsum board to improve the foaming and setting properties of the gypsum slurry. The main application of foaming agent in gypsum board production is to control the density of the gypsum board. Foaming agents reduce the density of the gypsum slurry, which eventually reduces the weight of the finished gypsum board.

China Gypsum Board Line Manufacturers and Suppliers.Our company has perfect design, professional team, and the most competitive price.

The gypsum ceiling board production line is a process that involves the manufacture of gypsum ceiling boards, also known as plasterboard or drywall. 

A paper faced gypsum board manufacture line is a series of machines and equipment used to produce paper-faced gypsum board, also known as drywall or plasterboard. The process involves mixing gypsum powder with water to form a slurry, which is then poured onto a layer of paper and covered with another sheet of paper. The mixture is then compressed to remove excess water and dried in a kiln. The result is a smooth, flat board with a paper covering on both sides.